Exploration of trend methods and scenarios in the implementation of an Sistem Manajemen Lingkungan (SML) in the batik industry of Klampar, Pamekasan Regency
Keywords:
Environmental Management System, ISO 14001:2015, Batik Industry, Environmental SciencesAbstract
To realize sustainable development, environmental preservation is a very important aspect, especially in efforts to reduce the negative impacts resulting from various industrial processes. Batik industry waste consisting of solid, liquid and gas waste has the potential to pollute the environment if not managed properly. This study aims to predict long-term environmental impacts and develop sustainable management strategies. The methods used are the GEMI (Global Environmental Management Initiative) checklist and scenario trend analysis. The results of the study indicate that the Klampar Batik Industry has not yet implemented SML optimally, so a sustainable strategy is needed to manage an environmentally friendly industry. The strategy is formulated through the Plan-Do-Check-Act (PDCA) approach, which is applied to each scenario, namely the normal scenario, the best scenario, and the worst scenario. Each scenario includes two types of preventive strategies to prevent problems and corrective to overcome environmental impacts. In the Normal Scenario, the strategy includes phased planning, implementation of simple waste processing technology, and evaluation through environmental audits. In the Best Scenario, the focus is on modern technology and ISO 14001 certification, while in the Worst Scenario, basic steps such as awareness campaigns and environmental remediation are taken to restore market confidence and ensure industry sustainability.
References
Apriyani, N. (2018). Industri Batik: Kandungan Limbah Cair dan Metode Pengolahannya. Media Ilmiah Teknik Lingkungan, 3(1), 21–29. https://doi.org/10.33084/mitl.v3i1.640
Fauza, Q., & Kautsar, A. P. (2018). Review Artikel: Plan-Do-Check-Act (Pdca) Dalam Meningkatkan Kualitas Pelayanan Kesehatan Di Rumah Sakit.
Galih, B. (2017). 2 Oktober 2009, UNESCO Akui Batik sebagai Warisan Dunia dari Indonesia. 2 Oktober 2009, UNESCO Akui Batik sebagai Warisan Dunia dari Indonesia Artikel ini telah tayang di Kompas.com dengan judul "2 Oktober 2009, UNESCO Akui Batik sebagai Warisan Dunia dari Indonesia", Klik untuk baca: https://nasional.kompas.com/read/2017/10/02/08144021/2-oktober-2009-unesco-akui-batik-sebagai-warisan-dunia-dari-indonesia. Kompascom+ baca berita tanpa iklan: https://kmp.im/plus6
GEMI. (2017). Self-Assessment Checklist. Available at: Https://gemi.org/solutions/solutions-interactive/iso-14001-2015-checklist.
Hannan, I. A., Witrie, S. E., & Adi, N. P. (2024). Dampak Pencemaran Air Akibat Limbah Industri Batik Printing di Kecamatan Pekalongan Utara Terhadap Kualitas Air Sungai.
Isniah, S., Hardi Purba, H., & Debora, F. (2020). Plan do check action (PDCA) method: Literature review and research issues. Jurnal Sistem Dan Manajemen Industri, 4(1), 72–81. https://doi.org/10.30656/jsmi.v4i1.2186
Kristiyanti, M. (2012). Peran Strategis Usaha Kecil Menengah (UKM) Dalam Pembangunan Nasional. 3(1).
Maruta, R. (2012). Maximizing Knowledge Work Productivity: A Time Constrained and Activity Visualized PDCA Cycle. Knowledge and Process Management,. https://doi.org/10.1002/kpm.1396,
Pandriratri, P., Rachmanto, T. A., Purnomo, Y. S., & Cahyonugroho, O. H. (2023). Method Gemi Self Assessment Untuk Identifikasi Management Lingkungan Rumah Pemotongan Unggas Di Pasar Tambahrejo Surabaya. Envirous, 3(2). https://doi.org/10.33005/envirous.v3i2.15
Putra, I. P., Leksono, A. S., Parmawati, R., & Li, T. (2024). The best scenario for the development of public green open space zones in Malang, Indonesia.
Rahmalia, N. (2021). Plan Do Check Act (PDCA), Metode Pemecahan Masalah dan Perbaikan Berkelanjutan. https://glints.com/id/lowongan/pdca-adalah/
Ramadan, B. S., Hapsari, S. B., Pramesti, A. L., & Ikhlas, N. (2019). Analisis Kuantitatif Sistem Manajemen Lingkungan Berdasarkan Klausul ISO 14001:2015. Jurnal Presipitasi : Media Komunikasi dan Pengembangan Teknik Lingkungan, 16(1), 1. https://doi.org/10.14710/presipitasi.v16i1.1-7
Setiawan, H. (2021). Penerapan Konsep Siklus Plan-Do-Check-Action (Pdca) Untuk Meningkatkan Kinerja Load Lugger.
Silva, A. S., Medeiros, C. F., & Vieira, R. K. (2017). Cleaner Production and PDCA cycle: Practical application for reducing the Cans Loss Index in a beverage company. Journal of Cleaner Production, 150, 324–338. https://doi.org/10.1016/j.jclepro.2017.03.033
Sokovic, M., Pavletic, D., & Kem Pipan, K. (2010). Quality Improvement Methodologies—PDCA Cycle, RADAR Matrix, DMAIC and DFSS.
Sujiwo, A. S., Purwanto, U. S., & Adhari, A. (2023). Penerapan Industri Hijau Pada IKM Batik. 4(2).
Sumbar, A. (2013). Sektor Industri Berperan Penting Dalam Pembangunan Nasional.
Yuliasari, A., Afiuddin, A. E., & Sophia, A. V. (2023). Evaluasi Pelaksanaan Sistem Manajemen Lingkungan ISO 14001: 2015 di Industri Tekstil Sepatu Mojokerto. 6(2623).
Downloads
Published
How to Cite
Conference Proceedings Volume
Section
License
Copyright (c) 2024 Hendri Setiawati, A. Hadian Pratama Hamzah, Nurhasanah Nurhasanah
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
